Manufacturer and distributor companies in the work truck industry that want to hire, train and retain certified welders should consider implementing this welder certification training program. NTEA recommends sending one person from each location to participate in the three-day Train-the-Trainer session. At the completion of the course, your employee will have the knowledge, skills, and tools necessary to train and certify your welding team on site at your facility.
upcoming Training
Work Truck Industry Welder Certification Train-the-Trainer Session
Lincoln Electric Welding Technology and Training Center (Euclid, Ohio)
April 30–May 2, 2024
Includes Welding Safety, Principles, GMAW Intro & Advanced GMAW
Cost: NTEA Member $695, Nonmember $1,095
UPCOMING advanced VIRTUAL TRAINING
Please note, each of these courses require registrants to first successfully complete the Work Truck Industry Welder Certification Train-the-Trainer program to become an NC3 certified trainer.
GMAW Aluminum & Stainless – Steel Virtual Train-the-Trainer Session
April 22 & April 24, 2024, 2–5 p.m. ET
Cost: $595
Thermal Cutting Virtual Train-the-Trainer Session
April 1, April 3, April 5 & April 8, 2024, 2–5 p.m. ET
Includes Plasma Arc (PAC), Oxyfuel (OFC) & Air Carbon Arc (CAC-A)
Cost: $595
New virtual session offerings:
Welding Print Reading Virtual Train-the-Trainer Session
April 10 & April 12, 2024, 2–5 p.m. ET
Cost: $395
Fabrication 1&2 Virtual Train-the-Trainer Session
May 6-8, 2024, 2–5 p.m. ET
Cost: $595
Contact NTEA at info@ntea.com with any questions.
What is the Work Truck Industry Welder Certification Program?
One of the most critical issues within the commercial vehicle community is attracting, training, and retaining employees — especially in skilled trades such as welding — due to increasingly high demand. The LEEPS for NTEA program was created to help address this challenge.
This unique program provides companies in the work truck industry with access to a consistent training curriculum they can utilize to train and certify welders within their organizations. Through this initiative, work truck industry businesses will have the tools they need to launch an in-house training curriculum that they can utilize for the development of welders.
All participants that attend this unique training program will have the opportunity to receive the following four certifications:
- Welding Safety
- Principles of Welding
- Introduction to GMAW
- Advanced GMAW
The program includes a Train-the-Trainer requirement, which upon completion prepares each participant to become the welding program Trainer within their organization. Upon successful completion of the Train-the-Trainer session, each participant will be certified as an NC3 Trainer and have the skills required to conduct the program training, testing and certification of their organization’s employees.
NTEA member companies that have successfully completed the program advise that it can take about six to eight weeks after completion of the on-site training course to implement the training at your facility and certify your current welders with this program. Once you have become an NC3 member and successfully completed the Train-the-Trainer initiative, you will have continual access to their online learning management system that is regularly updated with new course content.
Optionally, certified trainers can choose to attend NC3 and Lincoln Electric Education Partner Schools (LEEPS) GMAW Aluminum & Stainless – Steel Virtual Train-the-Trainer session to become GMAW certified GMAW trainers for both Aluminum and Stainless Steel.
What To Expect
Individuals attending the Train-the-Trainer program will need to bring the following with them to class:
- A laptop or Chromebook in order to access curriculum materials and the learning management system, as well as take the required assessments
- All necessary personal protective equipment, including but not limited to steel-toed boots, welding helmet, welding hat, welding jacket, safety glasses, ear protection, and gloves
- Welding tools, such as pliers and wire cutters, are optional
Lincoln Electric will provide all other necessary materials. Breakfast and lunch will be provided during the three-day training period.
NC3 will communicate with all registered participants leading up to the Train-the-Trainer program to ensure they have necessary information, including the program agenda, list of required materials, program expectations, access to the applicable websites and the learning management system, and details on any online coursework that needs to be completed prior to the start. NC3 will conduct a video call several weeks before to review program details/ requirements and answer questions.
Learn more about this offering and how your company can participate in the next Train-the-Trainer course in the fall by watching this short educational video and checking out our answers to Frequently Asked Questions.
